DISARMING does not shut off outputs.
In order to shut off an output with a strobe, siren/audible alarm, you will first want to check if there is a sensor tripping the output.
Usually a security sensor, high water sensor, or bilge sensor will be going off that is tripping the output. 9/10 time it's a security sensor.
You will then click into the sensor tile> click into the rules tab> and check if there is a runtime set for the output. If there is a run time such as 30secs, the output will be triggered for 30 secs.
|If there is no run time set the output will be triggered as long as the associated sensor is in alert.||So if it is a door sensor that the output (ex. Audible alarm) is tied to then the output (ex. Audible alarm) will trigger for as long as the door is open.|
If you want to override the settings within the tile you will want to use the commands page of the mobile app to toggle the output on or off.
Output 1 is the purple wire on harness 1.
Output 2 is the white wire on harness 1.
You cannot switch an output on or off simply by arming and disarming.